Evolve LHD 4-1 Stepped Medusa Manifolds - BMW E39 M5 - Evolve Automotive
Evolve LHD 4-1 Stepped Medusa Manifolds - BMW E39 M5 - Evolve Automotive
Evolve LHD 4-1 Stepped Medusa Manifolds - BMW E39 M5 - Evolve Automotive
Sku:N/A

Evolve LHD 4-1 Stepped Medusa Manifolds - BMW E39 M5

£3,229.99

DESCRIPTION

Availability

Shipping & Warranty

FOR LEFT HAND DRIVE CARS ONLY

The largest major restriction point of the E39 M5 S62 V8 engine is the exhaust manifolds / headers.
Changing the exhaust system without changing the headers gives no gain in power.  In fact, changing the header back system gives little if any power gain!

The factory items are very poorly designed and looking at them it is clear funds were saved in the department.  No other M Power car has ever had headers as poorly designed as on the S62 engine.

Performance headers are already available on the market but most compromises torque below 5000rpm especially under part throttle driving.  The very highlight of the S62 engine is it exceptional torque at the low to mid engine speeds.

Evolve produced an 4-1 design which not only allows for more power at the higher rpm's but also enhances the strong points of the S62 engine with almost 400 lb.ft torque (stock torque is 368 lb.ft) from 2000-5000rpm.  Above 5000rpm power increased by anything from 25-40hp depending on the mechanical setup of the engine.

The Evolve 4-1 headers can be used in isolation without any other performance upgrade and give a minimum gain of 30 hp and 27 lb/ft torque.

This upgrade represents the single largest performance upgrade with more power and torque accross all RPM points which in turn allows for much improved acceleration.  

Noise levels are only slightly increased with the headers alone but the engine does take on a more purposeful note.  For more noise please look at our exhaust range.

Much consideration has been giving to ease of fitment.  Subframe removal is not require during the installation.

In conjunction with the Evolve software and Intake system the S62 V8 will go from an average of 390 bhp / 368 lb.ft to 445 bhp / 400+ lb.ft

Overview:

  • Min. +25bhp / +25 lb/ft
  • 4-1 Step Design Design allowing wider power band power increase (allowing faster overall accelerating)
  • Constructed in Italy from T304 Stainless Steel

Dyno Graph (Headers + Evolve Exhaust only Conversion)

HEADERS MUST BE USED IN CONJUNCTION WITH EVOLVE SPORTS CAT OR DE-CAT

At Racehaus, we value customer satisfaction above all else. We strive to ensure that all products are in stock and ready to ship. However, in the instance that a product is not immediately available, we will promptly notify you before you place your order, so you can avoid any disappointment. 

Our typical turnaround time for dispatch is between 2 to 5 days. Shipping starts from as little as £5.99

Please note that this timeframe may be subject to supplier availability. We take pride in being transparent about lead times, and if a product has a longer lead time, we will personally contact you to provide updates on the shipping process. 

Let us take care of all your product needs with excellent customer service.
We are happy to inform you that we offer worldwide shipping on all our products. You can place your order with confidence knowing that we are committed to maintaining a high level of service quality. 

In case you need to return your product, we offer a 14-day return policy. Please refer to our returns policy for more details. 

Additionally, to give you extra peace of mind, This product comes with a manufacturer's warranty. You can check our warranty policy for more information.

We're committed to providing you with personalised support and assurance with all your order decisions. Our team is constantly striving to improve your experience with us, and we stand behind every product we sell. We're here to help answer any questions you may have. 

Don't hesitate to contact us for more information or assistance.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)