Eventuri Matte Carbon Fibre Intake System - BMW 3 Series E90 | E92 | E93 M3
Eventuri Matte Carbon Fibre Intake System - BMW 3 Series E90 | E92 | E93 M3
Eventuri Matte Carbon Fibre Intake System - BMW 3 Series E90 | E92 | E93 M3
Sku:N/A

Eventuri Matte Carbon Fibre Intake System - BMW 3 Series E90 | E92 | E93 M3

£783.00
£870.00
Tax included
Sale
-10%

DESCRIPTION

Availability

Shipping & Warranty

Performance Gain Dyno: 8-10hp, 10-12ft-lb
Performance Gain Road Dyno (Insoric): 16hp, 14Nm
IAT Difference with Ambient: Stock 7.5C : Eventuri 4.5C
V-Box Acceleration : 100-200kph Reduced By 0.3 Seconds

The BMW E90 | E92 | E93 M3 Eventuri intake system is the result of extensive research and optimisation which improves possibly one of the best designed stock intake systems we have seen.

The E9X stock airbox system is a brilliantly designed intake with an excellent flow path and feed system for ambient air. However on closer inspection, there are restrictions in the inlet tube connecting the airbox to the inlet manifold. By redesigning the tube yet maintaining the airbox, we have been able to allow the V8 engine to breathe with greater efficiency and therefore gain power.

In addition to the new tube design, we also identified a further restriction in the air feed system. To overcome this, we designed a scoop to allow an increase in airflow through the airbox. This reduces inlet temperature values further and adds to the performance gain of the system.

Performance Gain Dyno: 8-10hp, 10-12ft-lb 

Dyno tests were carried out showing a consistent gain of approximately 9hp and 11ft-lb of torque. The gain is not just at the peak but throughout the RPM range. This translates on the road to increased part throttle and full throttle response with the car pulling much more eagerly to the redline. The testing was done on the same day back-to-back and temperatures were monitored to ensure consistency. The car was tested firstly with the stock intake - hood closed. We then left the car on the dyno and installed the Eventuri. The car was then run again - hood closed. Several runs were carried out with both configurations to get a consistent result. 

Performance Gain Road Dyno (Insoric): 16hp, 14Nm 

The system was also tested using a road based measurement device (Insoric). On the road, the airflow is a lot better than the fan can achieve on the dyno and so the intake system is able to perform better. The following graph shows the difference the Eventuri intake makes on the road compared with the stock airbox. The measured gains were 16Hp and 14Nm : Solid lines show with the Eventuri and dashed lines are with stock airbox. Red line is power at the crank and blue line is at the wheels. 

Eventuri E92 M3 Insoric
 

Data Logging Flow and Inlet Temperature 

To monitor and record data output from the ECU we used a Bavarian Technic diagnostics tool. The car was fitted with the stock system and then data was logged in 4th gear to the redline. Then the Eventuri intake was fitted and the same method applied. The outputs show that the air mass flow with the Eventuri is higher across the entire RPM range - with a bigger difference at higher RPM where the restrictions in the stock system become more apparent. Furthermore the difference between the ambient temperature and the inlet air temperature (IAT) is also smaller with the Eventuri due to the scoop enabling a higher air speed through the airbox. Here are 2 screenshots of the data output, one at approximately 5000rpm and the other at approximately 8300rpm. 

Data Logging summary: 

  • 5000rpm IAT difference with ambient: Stock intake = 9.6 Degrees C Eventuri = 5.3 Degrees C
  • 8300rpm IAT difference with ambient: Stock intake = 7.6 Degrees C Eventuri = 4.7 Degrees C
  • 5000rpm Air Mass Flow Rate: Stock intake = 635 kg/h Eventuri = 650 kg/h
  • 8300rpm Air Mass Flow Rate: Stock intake = 1168 kg/h Eventuri = 1202 kg/h


 
 

The Interactive graph can be seen HERE 

VBox Acceleration Tests 

We also took the car for some road testing using a Vbox unit to record the acceleration from 60-130mph (also 100-200Km/h). Testing was carried out on the same stretch of road - again on the same day to keep variables minimum. Results show that with just the intake added, the acceleration times from 60-130mph and also 100-200Km/h reduced by approximately 0.3 seconds which is a significant change at such speeds. 

Acceleration results summary: 

  • 60-130mph with Stock intake = 11.157 seconds
  • 60-130mph with Eventuri intake = 10.886 seconds
  • 100-200Km/h with Stock intake = 9.56 seconds
  • 100-200Km/h with Eventuri intake = 9.236 seconds



 
 
 

At Racehaus, we value customer satisfaction above all else. We strive to ensure that all products are in stock and ready to ship. However, in the instance that a product is not immediately available, we will promptly notify you before you place your order, so you can avoid any disappointment. 

Our typical turnaround time for dispatch is between 2 to 5 days. Shipping starts from as little as £5.99

Please note that this timeframe may be subject to supplier availability. We take pride in being transparent about lead times, and if a product has a longer lead time, we will personally contact you to provide updates on the shipping process. 

Let us take care of all your product needs with excellent customer service.
We are happy to inform you that we offer worldwide shipping on all our products. You can place your order with confidence knowing that we are committed to maintaining a high level of service quality. 

In case you need to return your product, we offer a 14-day return policy. Please refer to our returns policy for more details. 

Additionally, to give you extra peace of mind, This product comes with a manufacturer's warranty. You can check our warranty policy for more information.

We're committed to providing you with personalised support and assurance with all your order decisions. Our team is constantly striving to improve your experience with us, and we stand behind every product we sell. We're here to help answer any questions you may have. 

Don't hesitate to contact us for more information or assistance.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)