Race haus Eventuri Carbon Fibre Stage 3 Intake System - Audi RS3 8V FL and TT RS
Race haus Eventuri Carbon Fibre Stage 3 Intake System - Audi RS3 8V FL and TT RS
Race haus Eventuri Carbon Fibre Stage 3 Intake System - Audi RS3 8V FL and TT RS
Race haus Eventuri Carbon Fibre Stage 3 Intake System - Audi RS3 8V FL and TT RS
Race haus Eventuri Carbon Fibre Stage 3 Intake System - Audi RS3 8V FL and TT RS
Race haus Eventuri Carbon Fibre Stage 3 Intake System - Audi RS3 8V FL and TT RS
Race haus Eventuri Carbon Fibre Stage 3 Intake System - Audi RS3 8V FL and TT RS
Race haus Eventuri Carbon Fibre Stage 3 Intake System - Audi RS3 8V FL and TT RS
Sku:N/A

Eventuri Carbon Fibre Stage 3 Intake System - Audi RS3 8V FL and TT RS

£1,800.00
Tax included

DESCRIPTION

Availability

Shipping & Warranty

Eventuri Carbon Fibre Stage 3 Intake System - Audi RS3 8V FL and TT RS 

Suitable for both DAZA and DWNA

With the 8V RS3 Gen 2 and TTRS 8S platforms being widely used for high power builds, we have developed a groundbreaking intake system to support even those exceeding the 1000whp mark. This stage 3 intake system has been developed to offer the highest possible flow rate whilst maintaining the lowest intake temperatures possible. Each component has been designed to provide the turbo with a smooth and free flowing path. The intake tube has an internal diameter of 103mm or just over 4″ and has a smooth curvature from the filter housing all the way to the turbo inlet. The filter itself has been specifically designed for this intake and has a huge outer diameter of 210mm or 8.3″ with a filtration surface area of over 130,000mm^2. The patented Venturi housing has been designed to provide the maximum internal volume possible for the RS3 engine bay space available and provides laminar flow to the turbo tube. Finally the duct seals the filter opening to the front slam panel but is not restricted by just the stock entry feed. We have lifted the front of the duct to now provide an extra opening behind the hood which is equivalent to an extra 7″ diameter hole for the intake to draw from. The resulting system has the capability of flowing 840 CFM at 28″ H2O while keeping intake temperatures at a minimum with the sealed design.

The Eventuri Difference

The 8V RS3/TTRS Eventuri system uses our Patented Carbon fibre Housings which provide an aerodynamically efficient airflow path from the filter to the turbo tubing. Not just another cone filter with a heat shield but a unique design which invokes the Venturi affect.

Flow Bench Testing

We conducted flow rate tests using a Superflow SF-1020 to measure the maximum flow rate possible at a pressure drop of 28” H2O. Tests were done on the same day in controlled conditions using the same test jig for each system. We tested our full intake system against the stock airbox system. The results show just how restrictive the stock airbox is, which we have managed to improve by up to 58% in maximum possible flow rate. Importantly this has been achieved with a sealed intake system so the intake temperatures will also be maintained at a minimum.

Notes: 
- May not fit with certain Aftermarket Diverter/Dump Valves

Specification

Patented Venturi Filter Housing Assembly



The Stage 3 filter housing comprises of a bespoke high flow filter, aluminium cowl, laser cut brackets and the carbon pod itself. The carbon pod shrouds the reverse mounted filter and smoothly shape the airflow down to the intake tubes. This smooth reduction in cross sectional area invokes the Venturi effect where the airflow accelerates whilst maintaining laminar conditions. It can be thought of as a large velocity stack - below is a diagram to show the comparison between our patented design and a regular intake system. Further details can be read in the Technology page.









Bespoke Stage 3 Cone Filter



In order to achieve the highest flow rate possible we had to redesign our stage 2 filter and increase the size to as large as was possible withing the RS3 engine bay area. The resulting filter has an outside diameter of 210mm or 8.3" and when flow tested with just the carbon housing is able to flow up to 940 CFM at 28" H2O. The filter medium is ISO tested to ensure that filtration is in line with OEM standards and is also dry. The filter is constructed with our signature flow cones to aid in the Venturi housing principle.



Carbon Fiber Intake Duct


The duct channels ambient air from the slam panel area to the filter housing. It fits inside the OEM ducting system and smoothly transitions to the circular filter housing shape. In order to ensure a good seal against engine bay heat - it also has a flexible rubber edging around the opening which presses against the filter housings creating the desired seal yet allowing the housing to move with the engine. Since this was designed to support high power builds, we found that the stock openings in the slam panel could cause a restriction at high flow demand. So we lifted the top surface of the duct and created an opening above the slam panel which is able to draw in cold air from behind the hood shut. This extra opening is equivalent to a hole with a diameter of over 7" and completely derestricts the stock cold air feed. The stage 3 duct was designed to have the maximum internal volume possible within the given geometry of the engine bay. This ensures that the filter housing is able to draw with minimum restriction.

We also made sure that the stage 3 duct is compatible with larger aftermarket throttle bodies.





Carbon Fiber Intake Tube


The intake tube is crafted from 100% prepreg carbon fiber and so as mentioned the internal surface is smooth and the carbon weave can be seen. The stage 3 tube has an internal diameter of 103mm or 4" and has a smoooth curvature to minimise pressure drop. It channels airflow from the Venturi housing to the turbo inlet. The smooth bend geometry ensures laminar flow is maintained from the filters to the exits.






Heat Shield




Due to the intense heat generated by the turbo, we designed a heat shield to protect the carbon tube. The shield is powder coated black but has a gold reflective layer on the base which deflects radiation heat from the turbo and catalyst. It has a stainless steel brace to provide rigidity and curves around the back of the tube to deflect convective heat away. Please note - this shield may not fit some full frame turbo systems with a different exhaust manifold. OPF (DWNA) Adapter



 

Compatible models

  • Audi 8V.5 RS3 Facelift model 2017 +
  • Audi 8S TTRS 2017 +

At Racehaus, we value customer satisfaction above all else. We strive to ensure that all products are in stock and ready to ship. However, in the instance that a product is not immediately available, we will promptly notify you before you place your order, so you can avoid any disappointment. 

Our typical turnaround time for dispatch is between 2 to 5 days. Shipping starts from as little as £5.99

Please note that this timeframe may be subject to supplier availability. We take pride in being transparent about lead times, and if a product has a longer lead time, we will personally contact you to provide updates on the shipping process. 

Let us take care of all your product needs with excellent customer service.
We are happy to inform you that we offer worldwide shipping on all our products. You can place your order with confidence knowing that we are committed to maintaining a high level of service quality. 

In case you need to return your product, we offer a 14-day return policy. Please refer to our returns policy for more details. 

Additionally, to give you extra peace of mind, This product comes with a manufacturer's warranty. You can check our warranty policy for more information.

We're committed to providing you with personalised support and assurance with all your order decisions. Our team is constantly striving to improve your experience with us, and we stand behind every product we sell. We're here to help answer any questions you may have. 

Don't hesitate to contact us for more information or assistance.

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
Products You Might Like